SMD Solder Paste Syringe XG-Z40 35G 183°c for SMD LED's and Ic Rework and soldering BGA chips.

https://youtu.be/Q9aPDYw6o5Q                                        

SMD LED Solder paste Mechanic XGZ40, 10ml, is designed for soldering BGA chips. Convenient packaging in the form of a syringe will allow you to use the paste without prior preparation immediately. Solder pastes are widely used in electronics for mounting planar (SMD) components on a printed circuit board. Special solder pastes have found application in the installation of copper and brass pipes and fittings in water supply systems.
The main advantage of the paste is the ease of mechanization of work. The paste is applied with special dispensers or stencil methods. The paste can be applied in an even, precise layer by mechanized and automated means, resulting in significant solder savings.

This is solder paste for soldering small SMD components in a reflow oven or with a hot air soldering station. comes in a small container for prototyping or repairing job. This pack is the right amount of solder paste for most of the hobby projects. This paste is the replacement of solder wire used in Through-hole soldering, some times solder flux is referred to as solder paste. This solder paste comes in a special container, when it is sealed, it can survive for 6 months. If you open the container and want to store rest of the paste for future use make sure it is tight and place it in a plastic zipper pouch and place it in the refrigerator. 

* Composition: Sn-63%, Pb-37%

* Solder particle size: 24 - 45 µm

* Flux type: No Clean

* Melting point: 200°C

* Residues do not require cleaning

* Easily washed off with alcohol-based products

* Packing: Composition: Sn-63%, Pb -37%

* Solder particle size: 24 - 45µm

* Packing: 35grmm (10ml)